flpaver Data Output Format: The following is all on one line: FORMAT 1 FROM CMD 180: ----------------------------------------------------- YYYY/MM/DD HH:MM C2 C3 C4 C5 C12 C13 C14 depth_flp algal_class{#}_flp where YYYY/MM/DD = Date as year, month, day HH:MM = Time as hour, minute MEASUREMENT RESULTS C2 = Pressure in [bar] of pressure sensor and air pressure (default 1 [bar]) C3 = internal instruments temperature (1) = internal instruments temperature (2) C4 = 8 raw values of the transmission (first values) or the fluorescence answers C5 = Temperature of the medium [C] ---space--- ALGAL CONCENTRATION C12 = Depth in [m] at assumed 1000 mbar surface pressure C13 = Transmission in [%] C14 = 8 concentrations (algae class 1..8) in [ug/l] and chi-square algae class 1 = Green algae [ug/l] algae class 2 = Blue green (cyanobacteria) [ug/l] algae class 3 = Diatoms [ug/l] algae class 4 = Cryptophyta [ug/l] algae class 5-7 = ??? (Not set;defaults only)[ug/l] algae class 8 = Yellow substances (CDOM) [ug/l] chi-square FORMAT 2 FROM CMD 190: ----------------------------------------------------- YYYY/MM/DD HH:MM A1 A2 A3 A4 A5 A6 A7 A8 where YYYY/MM/DD = Date as year, month, day HH:MM = Time as hour, minute MEASUREMENT RESULTS ALGAL CONCENTRATION A# = 8 concentrations (algae class 1..8) in [ug/l] and chi-square algae class 1 = Green algae [ug/l] algae class 2 = Blue green (cyanobacteria) [ug/l] algae class 3 = Diatoms [ug/l] algae class 4 = Cryptophyta [ug/l] algae class 5-7 = ??? (Not set;defaults only)[ug/l] algae class 8 = Yellow substances (CDOM) [ug/l]